Buffalo LS-WXL/LS-QVL等LS系列新手改机攻略,固件1.62以下，Raid均可

不错的教程，照着步骤来基本上没啥难度！   感谢楼主码字！  LS-QVL 使用中！  基本上想要的功能都可以实现！还不错！

改机好，在disk1下多了一个tmp的根目录，里面有个文件 lspro-bootstrap_1.2-7_arm.xsh

请问这个根目录能删除吗？

另外再请问下那个S95transmission文件到底可以用吗，我现在其他都OK了，就是不能自动启动。。。

第二部分 安装optware

用SECURECRT连接不上，如图：

我的怎么弄也不成功，总是 mountd is NOT running.
求高手指点

root@DanielNas:/mnt/array1/share# exportfs -rv        
exporting *:/mnt/array1/share
root@DanielNas:/mnt/array1/share# /opt/etc/init.d/S55portmap start
root@DanielNas:/mnt/array1/share# /opt/etc/init.d/S99nfs start
root@DanielNas:/mnt/array1/share# /opt/etc/init.d/S99nfs status
portmap is running.
mountd is NOT running.
root@DanielNas:/mnt/array1/share#

连上了，原来端口是22，不是楼主帖子里面的23.

安装完Transmission，重新启动NAS后，好像服务没有启动，浏览器和客户端都连不上。

自动化脚本已经上传的。

万岁爷 发表于 2012-10-20 13:47
自动化脚本已经上传的。

确实好像自动化脚本的问题，我也不能自启动，只有手动启动。

请问怎么手动启动？

手动启动成功，自动问题怎么解决呢？

万岁爷 发表于 2012-10-20 14:06
手动启动成功，自动问题怎么解决呢？

我的最开始可以自动启动，现在也不行了，只能手动启动，正在找原因呢

7. 建立自动化脚本，使transmission服务能随系统开机自动运行，关机前自动停止

echo '/opt/bin/transmission-daemon -g /root/.config/transmission-daemon' >/opt/etc/init.d/S95transmission.sh
chmod 755 /opt/etc/init.d/S95transmission.sh
echo 'killall /opt/bin/transmission-daemon' >/etc/rc.d/extensions.d/K05transmission.sh
chmod 755 /etc/rc.d/extensions.d/K05transmission.sh


这个是论坛上找到的，可行否？

jiff3 发表于 2012-10-20 14:38
7. 建立自动化脚本，使transmission服务能随系统开机自动运行，关机前自动停止

echo '/opt/bin/transmissi ...

可行，我的wvl就是这么干的，能开机自动运行。

jiff3 发表于 2012-10-19 23:28
改机好，在disk1下多了一个tmp的根目录，里面有个文件 lspro-bootstrap_1.2-7_arm.xsh

请问这个根目录能删 ...

改完了就能删了

万岁爷 发表于 2012-10-20 14:00
请问怎么手动启动？

用transmission-daemon这个命令

jiff3 发表于 2012-10-20 14:38
7. 建立自动化脚本，使transmission服务能随系统开机自动运行，关机前自动停止

echo '/opt/bin/transmissi ...

这个脚本怎么用？

Wacker 发表于 2012-10-14 20:04
第二部分:安装PT工具， 并建立自动化脚本，使transmission服务能随系统开机自动运行，关机前自 ...

您好，我按照您的教程改了n遍机器，但9091就是上不去，能不能帮我看看什么原因？万分感谢！

Wacker 发表于 2012-10-15 20:44
把你修改root账号那些命令的执行结果都贴上来看看

Last login: Sat Oct 20 23:55:48 2012
root@LS-WXL933:~# su
Last login: Sun Oct 21 00:03:01 JST 2012 from 192.168.1.101 on pts/0
bash-3.2# mkdir /mnt/disk1/tmp
mkdir: cannot create directory '/mnt/disk1/tmp': File exists
bash-3.2# cd /mnt/disk1/tmp/
<are/cs05q3armel/cross/stable/lspro-bootstrap_1.2-7_arm.xsh                  
--2012-10-21 00:03:43--  http://ipkg.nslu2-linux.org/feed ... strap_1.2-7_arm.xsh
Resolving ipkg.nslu2-linux.org... 140.211.169.161
Connecting to ipkg.nslu2-linux.org|140.211.169.161|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 251199 (245K) [text/plain]
Saving to: `lspro-bootstrap_1.2-7_arm.xsh.2'

100%[======================================>] 251,199     3.65K/s   in 1m 41s  

2012-10-21 00:05:26 (2.44 KB/s) - `lspro-bootstrap_1.2-7_arm.xsh.2' saved [251199/251199]

bash-3.2# sh ./lspro-bootstrap_1.2-7_arm.xsh
Optware Bootstrap for lspro.
Extracting archive... please wait
bootstrap/
bootstrap/bootstrap.sh
bootstrap/ipkg-opt.ipk
bootstrap/ipkg.sh
1248+1 records in
1248+1 records out
bootstrap/optware-bootstrap.ipk
bootstrap/wget.ipk
Backup your configuration settings, then type:
  rm -rf /mnt/disk1/.optware
  rm -rf /usr/lib/ipkg
This will remove all existing optware packages.

You must *reboot* and then restart the bootstrap script.
root@LS-WXL933:/mnt/disk1/tmp/bootstrap# ipkg update
Downloading http://ipkg.nslu2-linux.org/feed ... /stable/Packages.gz
Inflating http://ipkg.nslu2-linux.org/feed ... /stable/Packages.gz
Updated list of available packages in /opt/lib/ipkg/lists/cross
Successfully terminated.
root@LS-WXL933:/mnt/disk1/tmp/bootstrap# ipkg upgrade
Nothing to be done
Successfully terminated.
root@LS-WXL933:/mnt/disk1/tmp/bootstrap# ipkg install openssh
Installing openssh (5.9p1-1) to root...
Downloading http://ipkg.nslu2-linux.org/feed ... ssh_5.9p1-1_arm.ipk
Installing openssl (0.9.7m-6) to root...
Downloading http://ipkg.nslu2-linux.org/feed ... sl_0.9.7m-6_arm.ipk
Installing zlib (1.2.5-1) to root...
Downloading http://ipkg.nslu2-linux.org/feed ... lib_1.2.5-1_arm.ipk
Configuring openssh
update-alternatives: Linking //opt/bin/scp to /opt/bin/openssh-scp
update-alternatives: Linking //opt/bin/ssh to /opt/bin/openssh-ssh

Generating RSA Key...
Generating public/private rsa1 key pair.
Your identification has been saved in /opt/etc/openssh/ssh_host_key.
Your public key has been saved in /opt/etc/openssh/ssh_host_key.pub.
The key fingerprint is:
1e:86:1c:98:48:72:6e:08:5b:66:be:55:f5:b1:5a:bd
The key's randomart image is:
+--[RSA1 2048]----+
|o *   ... .      |
|.% . +   . +     |
|o = + .   + .    |
| . o . o o   .   |
|  .   o S   E    |
|       o .       |
|        .        |
|                 |
|                 |
+-----------------+
Generating RSA Key...
Generating public/private rsa key pair.
Your identification has been saved in /opt/etc/openssh/ssh_host_rsa_key.
Your public key has been saved in /opt/etc/openssh/ssh_host_rsa_key.pub.
The key fingerprint is:
3f:8f:cc:04:88:74:78:d4:e8:1b:18:3f:08:00:36:02
The key's randomart image is:
+--[ RSA 2048]----+
|E+    .o         |
|o o .o. .        |
|   .o*o          |
|   .o+=.         |
|    . .+S        |
|      .  o       |
|          +      |
|         + +     |
|          + .    |
+-----------------+
Generating DSA Key...
Generating public/private dsa key pair.
Your identification has been saved in /opt/etc/openssh/ssh_host_dsa_key.
Your public key has been saved in /opt/etc/openssh/ssh_host_dsa_key.pub.
The key fingerprint is:
63:52:61:c8:07:9d:dc:cb:e2:cb:9b:9a:cf:d5:e0:0b
The key's randomart image is:
+--[ DSA 1024]----+
|     ..=oo       |
|      o.=..      |
|       ... .     |
|       .. o      |
|      ..S..      |
|       o.o o     |
|       .E.o .    |
|       oo+ .     |
|      oo=..      |
+-----------------+
Fixing permissions on the /tmp directory...
/opt/sbin/sshd: no process killed
Configuring openssl
Configuring zlib
Successfully terminated.
root@LS-WXL933:/mnt/disk1/tmp/bootstrap# ipkg install nano
Installing nano (2.2.6-1) to root...
Downloading http://ipkg.nslu2-linux.org/feed ... ano_2.2.6-1_arm.ipk
Installing ncurses (5.7-1) to root...
Downloading http://ipkg.nslu2-linux.org/feed ... urses_5.7-1_arm.ipk
Configuring nano
Configuring ncurses
update-alternatives: Linking //opt/bin/clear to /opt/bin/ncurses-clear
Successfully terminated.
root@LS-WXL933:/mnt/disk1/tmp/bootstrap# cd /opt/etc/openssh/
root@LS-WXL933:/opt/etc/openssh# passwd
Enter new UNIX password:
Retype new UNIX password:
passwd: password updated successfully
root@LS-WXL933:/opt/etc/openssh# cd /mnt/disk1/tmp/
root@LS-WXL933:/mnt/disk1/tmp# ipkg install transmission
Installing transmission (2.61-1) to root...
Downloading http://ipkg.nslu2-linux.org/feed ... sion_2.61-1_arm.ipk
Installing libcurl (7.24.0-1) to root...
Downloading http://ipkg.nslu2-linux.org/feed ... rl_7.24.0-1_arm.ipk
Installing libevent (2.0.20-1) to root...
Downloading http://ipkg.nslu2-linux.org/feed ... nt_2.0.20-1_arm.ipk
Configuring libcurl
Configuring libevent
Configuring transmission
Successfully terminated.
root@LS-WXL933:/mnt/disk1/tmp# transmission-daemon -f
[00:29:07.730] Transmission 2.61 (13407) started (session.c:720)
[00:29:07.731] RPC Server Adding address to whitelist: 127.0.0.1 (rpc-server.c:803)
[00:29:07.731] RPC Server Serving RPC and Web requests on port 127.0.0.1:9091/transmission/ (rpc-server.c:997)
[00:29:07.731] RPC Server Whitelist enabled (rpc-server.c:1001)
[00:29:07.731] UDP Failed to set receive buffer: requested 4194304, got 327680 (tr-udp.c:77)
[00:29:07.731] UDP Please add the line "net.core.rmem_max = 4194304" to /etc/sysctl.conf (tr-udp.c:82)
[00:29:07.731] UDP Failed to set send buffer: requested 1048576, got 327680 (tr-udp.c:88)
[00:29:07.731] UDP Please add the line "net.core.wmem_max = 1048576" to /etc/sysctl.conf (tr-udp.c:93)
[00:29:07.731] DHT Generating new id (tr-dht.c:309)
[00:29:07.732] Using settings from "/root/.config/transmission-daemon" (daemon.c:517)
[00:29:07.732] Saved "/root/.config/transmission-daemon/settings.json" (bencode.c:1731)
[00:29:07.732] Port Forwarding (NAT-PMP) initnatpmp succeeded (0) (natpmp.c:72)
[00:29:07.732] Port Forwarding (NAT-PMP) sendpublicaddressrequest succeeded (2) (natpmp.c:72)
[00:29:07.732] Port Forwarding (UPnP) Found Internet Gateway Device "http://192.168.1.1:1900/ipc" (upnp.c:202)
[00:29:07.732] Port Forwarding (UPnP) Local Address is "192.168.1.102" (upnp.c:204)
[00:29:08.740] Port Forwarding (UPnP) Port forwarding through "http://192.168.1.1:1900/ipc", service "urn:schemas-upnp-org:service:WANIPConnection:1". (local address: 192.168.1.102:51413) (upnp.c:279)
[00:29:08.740] Port Forwarding (UPnP) Port forwarding successful! (upnp.c:282)
[00:29:08.740] Port Forwarding State changed from "Not forwarded" to "Forwarded" (port-forwarding.c:93)
[00:29:32.980] DHT Attempting bootstrap from dht.transmissionbt.com (tr-dht.c:247)
^C[00:35:27.940] Saved "/root/.config/transmission-daemon/settings.json" (bencode.c:1731)
[00:35:27.940] DHT Not saving nodes, DHT not ready (tr-dht.c:356)
[00:35:27.941] Port Forwarding Stopped (port-forwarding.c:181)
[00:35:27.941] Port Forwarding (UPnP) Stopping port forwarding through "http://192.168.1.1:1900/ipc", service "urn:schemas-upnp-org:service:WANIPConnection:1" (upnp.c:245)
[00:35:27.941] Port Forwarding State changed from "Forwarded" to "Not forwarded" (port-forwarding.c:93)
Closing transmission session... done.

root@LS-WXL933:/mnt/disk1/tmp# mkdir /mnt/disk1/share/Downloads
mkdir: cannot create directory '/mnt/disk1/share/Downloads': No such file or directory
root@LS-WXL933:/mnt/disk1/tmp# mkdir /mnt/disk1/share
root@LS-WXL933:/mnt/disk1/tmp# mkdir /mnt/disk1/share/downloads
root@LS-WXL933:/mnt/disk1/tmp# chmod -R 777 /mnt/disk1/share/Downloads
chmod: /mnt/disk1/share/Downloads: No such file or directory
root@LS-WXL933:/mnt/disk1/tmp# chmod -R 777 /mnt/disk1/share/Downloads
chmod: /mnt/disk1/share/Downloads: No such file or directory
root@LS-WXL933:/mnt/disk1/tmp# mkdir /mnt/disk1/share/downloads
mkdir: cannot create directory '/mnt/disk1/share/downloads': File exists
root@LS-WXL933:/mnt/disk1/tmp# chmod -R 777 /mnt/disk1/share/Downloads
chmod: /mnt/disk1/share/Downloads: No such file or directory
root@LS-WXL933:/mnt/disk1/tmp# chmod -R 777 /mnt/disk1/shareDownloads
chmod: /mnt/disk1/shareDownloads: No such file or directory
root@LS-WXL933:/mnt/disk1/tmp# chmod -R 777 /mnt/disk1/share/downloads
root@LS-WXL933:/mnt/disk1/tmp# mkdir /mnt/disk1/share/Downloads/incomplete
mkdir: cannot create directory '/mnt/disk1/share/Downloads/incomplete': No such file or directory
root@LS-WXL933:/mnt/disk1/tmp# mkdir /mnt/disk1/share/downloads/incomplete
root@LS-WXL933:/mnt/disk1/tmp# chmod -R 777 /mnt/disk1/share/Downloads/incompl>
chmod: /mnt/disk1/share/Downloads/incomplete: No such file or directory
root@LS-WXL933:/mnt/disk1/tmp# chmod -R 777 /mnt/disk1/share/downloads/incompl>
root@LS-WXL933:/mnt/disk1/tmp# reboot
root@LS-WXL933:/mnt/disk1/tmp#

Last login: Sat Oct 20 23:55:48 2012
root@LS-WXL933:~# su
Last login: Sun Oct 21 00:03:01 JST 2012 from 192.168.1.101 on pts/0
bash-3.2# mkdir /mnt/disk1/tmp
mkdir: cannot create directory '/mnt/disk1/tmp': File exists
bash-3.2# cd /mnt/disk1/tmp/
<are/cs05q3armel/cross/stable/lspro-bootstrap_1.2-7_arm.xsh                  
--2012-10-21 00:03:43--  http://ipkg.nslu2-linux.org/feed ... strap_1.2-7_arm.xsh
Resolving ipkg.nslu2-linux.org... 140.211.169.161
Connecting to ipkg.nslu2-linux.org|140.211.169.161|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 251199 (245K) [text/plain]
Saving to: `lspro-bootstrap_1.2-7_arm.xsh.2'

100%[======================================>] 251,199     3.65K/s   in 1m 41s  

2012-10-21 00:05:26 (2.44 KB/s) - `lspro-bootstrap_1.2-7_arm.xsh.2' saved [251199/251199]

bash-3.2# sh ./lspro-bootstrap_1.2-7_arm.xsh
Optware Bootstrap for lspro.
Extracting archive... please wait
bootstrap/
bootstrap/bootstrap.sh
bootstrap/ipkg-opt.ipk
bootstrap/ipkg.sh
1248+1 records in
1248+1 records out
bootstrap/optware-bootstrap.ipk
bootstrap/wget.ipk
Backup your configuration settings, then type:
  rm -rf /mnt/disk1/.optware
  rm -rf /usr/lib/ipkg
This will remove all existing optware packages.

You must *reboot* and then restart the bootstrap script.
root@LS-WXL933:/mnt/disk1/tmp/bootstrap# ipkg update
Downloading http://ipkg.nslu2-linux.org/feed ... /stable/Packages.gz
Inflating http://ipkg.nslu2-linux.org/feed ... /stable/Packages.gz
Updated list of available packages in /opt/lib/ipkg/lists/cross
Successfully terminated.
root@LS-WXL933:/mnt/disk1/tmp/bootstrap# ipkg upgrade
Nothing to be done
Successfully terminated.
root@LS-WXL933:/mnt/disk1/tmp/bootstrap# ipkg install openssh
Installing openssh (5.9p1-1) to root...
Downloading http://ipkg.nslu2-linux.org/feed ... ssh_5.9p1-1_arm.ipk
Installing openssl (0.9.7m-6) to root...
Downloading http://ipkg.nslu2-linux.org/feed ... sl_0.9.7m-6_arm.ipk
Installing zlib (1.2.5-1) to root...
Downloading http://ipkg.nslu2-linux.org/feed ... lib_1.2.5-1_arm.ipk
Configuring openssh
update-alternatives: Linking //opt/bin/scp to /opt/bin/openssh-scp
update-alternatives: Linking //opt/bin/ssh to /opt/bin/openssh-ssh

Generating RSA Key...
Generating public/private rsa1 key pair.
Your identification has been saved in /opt/etc/openssh/ssh_host_key.
Your public key has been saved in /opt/etc/openssh/ssh_host_key.pub.
The key fingerprint is:
1e:86:1c:98:48:72:6e:08:5b:66:be:55:f5:b1:5a:bd
The key's randomart image is:
+--[RSA1 2048]----+
|o *   ... .      |
|.% . +   . +     |
|o = + .   + .    |
| . o . o o   .   |
|  .   o S   E    |
|       o .       |
|        .        |
|                 |
|                 |
+-----------------+
Generating RSA Key...
Generating public/private rsa key pair.
Your identification has been saved in /opt/etc/openssh/ssh_host_rsa_key.
Your public key has been saved in /opt/etc/openssh/ssh_host_rsa_key.pub.
The key fingerprint is:
3f:8f:cc:04:88:74:78:d4:e8:1b:18:3f:08:00:36:02
The key's randomart image is:
+--[ RSA 2048]----+
|E+    .o         |
|o o .o. .        |
|   .o*o          |
|   .o+=.         |
|    . .+S        |
|      .  o       |
|          +      |
|         + +     |
|          + .    |
+-----------------+
Generating DSA Key...
Generating public/private dsa key pair.
Your identification has been saved in /opt/etc/openssh/ssh_host_dsa_key.
Your public key has been saved in /opt/etc/openssh/ssh_host_dsa_key.pub.
The key fingerprint is:
63:52:61:c8:07:9d:dc:cb:e2:cb:9b:9a:cf:d5:e0:0b
The key's randomart image is:
+--[ DSA 1024]----+
|     ..=oo       |
|      o.=..      |
|       ... .     |
|       .. o      |
|      ..S..      |
|       o.o o     |
|       .E.o .    |
|       oo+ .     |
|      oo=..      |
+-----------------+
Fixing permissions on the /tmp directory...
/opt/sbin/sshd: no process killed
Configuring openssl
Configuring zlib
Successfully terminated.
root@LS-WXL933:/mnt/disk1/tmp/bootstrap# ipkg install nano
Installing nano (2.2.6-1) to root...
Downloading http://ipkg.nslu2-linux.org/feed ... ano_2.2.6-1_arm.ipk
Installing ncurses (5.7-1) to root...
Downloading http://ipkg.nslu2-linux.org/feed ... urses_5.7-1_arm.ipk
Configuring nano
Configuring ncurses
update-alternatives: Linking //opt/bin/clear to /opt/bin/ncurses-clear
Successfully terminated.
root@LS-WXL933:/mnt/disk1/tmp/bootstrap# cd /opt/etc/openssh/
root@LS-WXL933:/opt/etc/openssh# passwd
Enter new UNIX password:
Retype new UNIX password:
passwd: password updated successfully
root@LS-WXL933:/opt/etc/openssh# cd /mnt/disk1/tmp/
root@LS-WXL933:/mnt/disk1/tmp# ipkg install transmission
Installing transmission (2.61-1) to root...
Downloading http://ipkg.nslu2-linux.org/feed ... sion_2.61-1_arm.ipk
Installing libcurl (7.24.0-1) to root...
Downloading http://ipkg.nslu2-linux.org/feed ... rl_7.24.0-1_arm.ipk
Installing libevent (2.0.20-1) to root...
Downloading http://ipkg.nslu2-linux.org/feed ... nt_2.0.20-1_arm.ipk
Configuring libcurl
Configuring libevent
Configuring transmission
Successfully terminated.
root@LS-WXL933:/mnt/disk1/tmp# transmission-daemon -f
[00:29:07.730] Transmission 2.61 (13407) started (session.c:720)
[00:29:07.731] RPC Server Adding address to whitelist: 127.0.0.1 (rpc-server.c:803)
[00:29:07.731] RPC Server Serving RPC and Web requests on port 127.0.0.1:9091/transmission/ (rpc-server.c:997)
[00:29:07.731] RPC Server Whitelist enabled (rpc-server.c:1001)
[00:29:07.731] UDP Failed to set receive buffer: requested 4194304, got 327680 (tr-udp.c:77)
[00:29:07.731] UDP Please add the line "net.core.rmem_max = 4194304" to /etc/sysctl.conf (tr-udp.c:82)
[00:29:07.731] UDP Failed to set send buffer: requested 1048576, got 327680 (tr-udp.c:88)
[00:29:07.731] UDP Please add the line "net.core.wmem_max = 1048576" to /etc/sysctl.conf (tr-udp.c:93)
[00:29:07.731] DHT Generating new id (tr-dht.c:309)
[00:29:07.732] Using settings from "/root/.config/transmission-daemon" (daemon.c:517)
[00:29:07.732] Saved "/root/.config/transmission-daemon/settings.json" (bencode.c:1731)
[00:29:07.732] Port Forwarding (NAT-PMP) initnatpmp succeeded (0) (natpmp.c:72)
[00:29:07.732] Port Forwarding (NAT-PMP) sendpublicaddressrequest succeeded (2) (natpmp.c:72)
[00:29:07.732] Port Forwarding (UPnP) Found Internet Gateway Device "http://192.168.1.1:1900/ipc" (upnp.c:202)
[00:29:07.732] Port Forwarding (UPnP) Local Address is "192.168.1.102" (upnp.c:204)
[00:29:08.740] Port Forwarding (UPnP) Port forwarding through "http://192.168.1.1:1900/ipc", service "urn:schemas-upnp-org:service:WANIPConnection:1". (local address: 192.168.1.102:51413) (upnp.c:279)
[00:29:08.740] Port Forwarding (UPnP) Port forwarding successful! (upnp.c:282)
[00:29:08.740] Port Forwarding State changed from "Not forwarded" to "Forwarded" (port-forwarding.c:93)
[00:29:32.980] DHT Attempting bootstrap from dht.transmissionbt.com (tr-dht.c:247)
^C[00:35:27.940] Saved "/root/.config/transmission-daemon/settings.json" (bencode.c:1731)
[00:35:27.940] DHT Not saving nodes, DHT not ready (tr-dht.c:356)
[00:35:27.941] Port Forwarding Stopped (port-forwarding.c:181)
[00:35:27.941] Port Forwarding (UPnP) Stopping port forwarding through "http://192.168.1.1:1900/ipc", service "urn:schemas-upnp-org:service:WANIPConnection:1" (upnp.c:245)
[00:35:27.941] Port Forwarding State changed from "Forwarded" to "Not forwarded" (port-forwarding.c:93)
Closing transmission session... done.

root@LS-WXL933:/mnt/disk1/tmp# mkdir /mnt/disk1/share/Downloads
mkdir: cannot create directory '/mnt/disk1/share/Downloads': No such file or directory
root@LS-WXL933:/mnt/disk1/tmp# mkdir /mnt/disk1/share
root@LS-WXL933:/mnt/disk1/tmp# mkdir /mnt/disk1/share/downloads
root@LS-WXL933:/mnt/disk1/tmp# chmod -R 777 /mnt/disk1/share/Downloads
chmod: /mnt/disk1/share/Downloads: No such file or directory
root@LS-WXL933:/mnt/disk1/tmp# chmod -R 777 /mnt/disk1/share/Downloads
chmod: /mnt/disk1/share/Downloads: No such file or directory
root@LS-WXL933:/mnt/disk1/tmp# mkdir /mnt/disk1/share/downloads
mkdir: cannot create directory '/mnt/disk1/share/downloads': File exists
root@LS-WXL933:/mnt/disk1/tmp# chmod -R 777 /mnt/disk1/share/Downloads
chmod: /mnt/disk1/share/Downloads: No such file or directory
root@LS-WXL933:/mnt/disk1/tmp# chmod -R 777 /mnt/disk1/shareDownloads
chmod: /mnt/disk1/shareDownloads: No such file or directory
root@LS-WXL933:/mnt/disk1/tmp# chmod -R 777 /mnt/disk1/share/downloads
root@LS-WXL933:/mnt/disk1/tmp# mkdir /mnt/disk1/share/Downloads/incomplete
mkdir: cannot create directory '/mnt/disk1/share/Downloads/incomplete': No such file or directory
root@LS-WXL933:/mnt/disk1/tmp# mkdir /mnt/disk1/share/downloads/incomplete
root@LS-WXL933:/mnt/disk1/tmp# chmod -R 777 /mnt/disk1/share/Downloads/incompl>
chmod: /mnt/disk1/share/Downloads/incomplete: No such file or directory
root@LS-WXL933:/mnt/disk1/tmp# chmod -R 777 /mnt/disk1/share/downloads/incompl>
root@LS-WXL933:/mnt/disk1/tmp# reboot
root@LS-WXL933:/mnt/disk1/tmp#