918+ loader引导增强版（extra.lzmav0.5版）7月30日更新

更新：扩展驱动已经被升级到v0.5，大小从1M增加到11M

众所周知，JUN的1.02b,1.03a2 loader引导对网卡支持非常有限，这是因为他直接用原汁原味的DSM驱动。国外有个叫做G-88的大神制作了jun引导的扩展包，所有系列都有。针对于磁盘控制器，以及网卡驱动跟处理器驱动进行增强。看他的帖子有说如果是针对磁盘控制器进行增强，那么会多少映像一点传输性能，不过问题不大。现在我将他的扩展包添加到jun的引导里，简单的说jun原本的驱动才1M，现在加上这个扩展达到10M多，可见增加了多少东西进去.造福一下那些能启动却搜索不到等等，来吧，小白鼠们上吧！至少你们还有一线希望，如果再支持不了那么你们真得死心吧
我已经把扩展包集成到引导里面了，重新制作你们的引导然后该改什么改什么的试试看吧。再提醒一句，pid，vid必须要改，主板如果有c1也要关闭。一下是支持的网卡驱动列表，控制器，处理器
下载地址:已经集成驱动扩展，只需改vid，pid就行了

链接: https://pan.baidu.com/s/1ZSIKMPTSvU4IC4u6x8l0Pw 密码: c9bt

原贴地址:
https://xpenology.com/forum/topi ... a2dsm62x-for-ds918/


下面是支持列表

NETWORK DRIVERS LIST - Click here to see (Hide contents)

NETWORK

AMD
pcnet32: AMD PCnet32 PCI

Agere Systems
et131x: Agere Systems ET-131x PCI-E Gigabit Ethernet

Asix
asix: ASIX AX88xxx Based USB 2.0 Ethernet Adapters
ax88179_178a: ASIX USB 2.0/3.0 Gigabit Ethernet Controller

mcs7830: ASIX/MosChip 7830 Based USB 2.0 Ethernet Adapters, NEXT-220UL

Atheros
atl1: Atheros/Attansic L1 Gigabit Ethernet
atl1c: Atheros L1C Gigabit Ethernet, AR8132, AR8131, AR8151, AR8152
atl1e: Atheros L1E Gigabit Ethernet, AR8121, AR8113, AR8114
atl2: Atheros L2 Fast Ethernet

Aquantia
atlantic: Aquantia 1/2.5/5/10 Gigabit PCI Express Family AQC-100 / AQC-107 / AQC-108 (external source: Aquantia-AQtion-2.0.10.0)

Broadcom
[b44: Broadcom 440x/47xx]
bnx2: Broadcom NetXtremeII BCM5706/BCM5708/5709/5716 (firmware needed)
bnx2x: Broadcom NetXtremeII 10Gb BCM57710/BCM57711/BCM57711E/BCM57712 (firmware needed)
cnic: Broadcom NetXtreme II CNIC Driver
tg3: Broadcom Tigon3 BCM5705/BCM5703/BCM5702/BCM5701/BCM5700/BCM5721/BCM5751/BCM5788/BCM5704/BCM5752/BCM5789/BCM5723/BCM5761/BCM5787/BCM5755/BCM5722/BCM5754/BCM57781/BCM57785/BCM5718BCM57765/BCM57761/BCM5719/BCM5725/BCM5762/BCM5720/BCM57790/BCM57795/BCM57766/BCM57780

Brocade
bna: Brocade 1010/1020 10Gb Ethernet (firmware needed)

Calxeda
xgmac:  1G/10G XGMAC Ethernet Driver

Conexant

cx82310_eth: Conexant CX82310 USB ethernet

Chelsio
cxgb: Chelsio 10Gb Ethernet T210
cxgb3: Chelsio Communications T3 10Gb (firmware needed), N310E/B320E/S302E
cxgb4: Chelsio Communications T4 Ethernet (firmware needed), T420/T440/T422/T404/B420/B404

Cisco
enic: Cisco VIC Ethernet NIC

D-Link
dl2k: D-Link DL2000-based Gigabit Ethernet Adapter

Emulex
be2net: Emulex OneConnect Skyhawk/Emulex OneConnect Skyhawk-VF/Emulex OneConnect Lancer/Emulex BladeEngine2 10Gb Gen2 PCIe/Emulex BladeEngine3 10Gb/Gen2 PCIe/Emulex OneConnect OCe10100/OCe10102 Series 10 GbE/Emulex OneConnect 10Gb NIC (be3)

Exar / Neterion
s2io: Neterion Exar Xframe 10Gb Ethernet Driver
vxge: Neterion Exar X3100 Series 10GbE PCIe Server Driver

HP

hp100 : HP 10/100VG PCLAN (ISA, EISA, PCI)

Intel
e100: Intel PRO/100+ (firmware needed)
e1000: Intel PCI/PCI-X Gigabit Network Adapters Intel PRO/1000 CT/F/GT/MF/MT/T/XF/XT 82573L/82572EI/82571EB/82573E/82573V/82567/82574L/82566MM/82566MC
e1000e: Intel PCIe PRO/1000 82563/82566/82567/82571/82572/82573/82574/82577/82578/82583/Gigabit CT Desktop Adapter/PRO/1000 PT/PF/I217-LM/V/I218-V/LM/I219 LM/V (tested, v3.4.0.2 from external source)
i40e: Intel 40 Gigabit X710-AM2/XL710-AM1/XL710-AM2/X710-DA2/X710-DA4/XL710-QDA1/XL710-QDA2
igb: Intel Gigabit Ethernet 82575/82576/82580/I350/I210/I211
ixgbe: Intel 10 Gigabit AF DA/AT/AT2/CX4/XF LR/XR/82599EB/82598EB/82599ES/82599EN, X540-T1/X540-T2/540-AT2/X520-SR1/X520-SR2/X520-DA2/X520-LR1/X520-DA1/X520-DA4/X520-QDA1/X520-T2 X550-BT2/AT/AT2 X550-T1/T2, X552, X553, X557 (v5.0.4 from external source)

JMicron

jme: JMicron PCIe Gigabit

Nvidia

forcedeth: Nvidia nForce Ethernet

Marvell Yukon/SysKonnect
mvmdio: Marvell MDIO interface
sky2: Marvell Yukon 2 Gigabit Ethernet 88E8021/88E8022/88E8061/88E8062/88E8021/88E8022/88E8061/88E8062/88E8035/88E8036/88E8038/88E8039/88E8040/88E8040T/88EC033/88E8042/88E8048/88E8052/88E8050/88E8053/88E8055/88E8056/88E8070/88EC036/88EC032/88EC034/88EC042/88E8058/88E8071/88E8072/88E8055/88E8075/88E8057/88E8059/88E8079, SysKonnect SK-9Sxx/SK-9Exx/SK-9S21/SK-9E21M
skge: Marvell Yukon 88E8001/8003/8010, SK-9xx/SK-98xx V2.0

Mellanox
mlx_compat, mlx4_core, mlx4_en, mlx5_core: Mellanox T25400/MT27500/MT27520/MT25408/MT25418/MT25448/MT25408/MT26418/MT26428/MT26438/MT26448/MT25408/MT26468/MT26478/MT27600/MT27700/MT27710

(MT27800/MT28800/MT28908/MT416842)

ConnectX MT254xx
ConnectX-2 MT264xx
ConnectX-3 MT275xx
ConnectX-IB MT276xx
ConnectX-4 MT277xx
(ConnectX-5 MT278xx, MT288xx)
(ConnectX-6 MT289xx)

Pegasus
(pegasus: Pegasus/Pegasus II USB ethernet driver)

Prolific
plusb: Prolific PL-2301/2302/25A1 based

QLogic
netxen_nic: QLogic/NetXen NIC
qla3xxx: QLogic QLA3XXX Network driver
qlcnic: QLOGIC QLCNIC 1/10Gb Converged Ethernet
qlge: QLogic QLGE 10Gb Ethernet

Qualcomm
alx: Qualcomm Atheros AR816x/AR817x

Realtek
(r8101: 10/100 Realtek PCIe FE Family RTL8100E/RTL8101E/RTL8102E-GR/RTL8103E(L)/RTL8102E(L)/RTL8101E/RTL8103T/RTL8401/RTL8401P/RTL8105E/RTL8402/RTL8106E/RTL8106EUS/RTL8107E)
r8152: RTL8152/RTL8153 Based USB 2.0/3.0 Ethernet Adapter (source: 0008-r8152.53-2.09.0.tar.bz2)
r8168: Realtek Gigabit Ethernet PCIe
RTL8111B/RTL8168B/RTL8111/RTL8168/RTL8111C/RTL8111CP/RTL8111D(L)/RTL8168C/RTL8111DP/RTL8111E/RTL8168E/RTL8111F/RTL8411/RTL8111G/RTL8111GUS/RTL8411B(N)/RTL8118AS/RTL8111H(S)/RTL8118/RTL8119i (source: 0010-r8168-8.045.08.tar.bz2)
r8169: Realtek Gigabit Ethernet PCI RTL8110SC(L) (RTL8110S/RTL8110SB(L)/RTL8169SB(L)/RTL8169S(L)/RTL8169) (source: 0008-r8169-6.025.03.tar.bz2)
rtl8150: USB RTL8150 based USB Ethernet Adapter

Silan
sc92031: Silan SC92031 PCI Fast Ethernet Adapter driver

SIS
sis900: SiS900/7016
sis190: SiS190/SiS191

Solarflare
sfc: Solarflare NIC 10Gb/s

Sundance Technology
ipg: Sundance Technology IPG Triple-Speed Ethernet IC PLUS IP1000 NIC, Sundance Technology ST2021 based NIC, Tamarack Microelectronics TC9020/9021 based, D-Link NIC IP1000A

Tehuti
tn40xx: Tehuti 10GbE NIC driver MV88X3120/QT2025/TLK10232/AQ2104/AQR105, ASUS XG-C100F, Buffalo LGY-PCIE-MG, D-Link DXE-810T/S, Edimax 10G, IEI Mustang-200, TN9030, TN9210, TN9310, TN9510, TN9610, TN9710P, TN9710Q (v0.3.6.16.1 from external source)

VIA
via-rhine: VIA Rhine
via-velocity: VIA Velocity

VMware
vmxnet3: VMware vmxnet3 virtual NIC

STORAGE DRIVERS LIST - Click here to see (Hide contents)

STORAGE

3ware
(3w-xxxx: 3ware 5/6/7/8xxx ATA-RAID support)
3w-9xxx: 3ware 9xxx SATA-RAID support
3w-sas: 3ware 97xx SAS/SATA-RAID support

Adaptec
aacraid: HBA 1000 series, Adaptec 2200S, Adaptec 2120S, Adaptec 2200S, Adaptec 3230S, Adaptec 3240S, Adaptec 2020ZCR, Adaptec 2025ZCR, Adaptec 2230S, Adaptec 2230SLP, Adaptec 2130S, Adaptec 2020SA, Adaptec 2025SA, Adaptec 2410SA, Adaptec 2610SA, Adaptec 21610SA, Adaptec 2240S, Adaptec 2810SA, Adaptec 4005, Adaptec 4000, Adaptec 4800SAS, Adaptec 4805SAS, Adaptec 2820SA, Adaptec 2620SA, Adaptec 2420SA, Adaptec 1800, Adaptec 5445, SMC AOC-USAS-S4i, Adaptec 5805, SMC AOC-USAS-S8i, Adaptec 5085, Adaptec 3405, Adaptec 3805, Adaptec 3085, Adaptec 31205, Adaptec 31605, Adaptec 51205, Adaptec 51605, SMC AOC-USAS-S4iR, SMC AOC-USAS-S8iR, Adaptec 51245, Adaptec 51645, Adaptec 52445, Adaptec 5405, SMC AOC-USAS-S8i-LP, SMC AOC-USAS-S8iR-LP, Adaptec ASR-2045, Adaptec ASR-2405, Adaptec ASR-2445, Adaptec ASR-2805, Adaptec 5405Z, Adaptec 5445Z, Adaptec 5805Z, Adaptec 5400S, Adaptec 5400S, Adaptec Themisto, Adaptec Callisto, Dell PERC 2/QC, Dell PERC 2/QC, Dell PERC 2/Si, Dell PERC 3/Si, Dell PERC 3/Di, Dell PERC 3/SiF, Dell PERC 3/DiF, Dell PERC 3/DiV, Dell PERC 3/DiL, Dell PERC 3/DiJ, Dell PERC 3/DiD, Dell PERC 3/DiB, Dell PERC 320/DC, Dell CERC 2, HP NetRAID-4M, Legend S220, Legend S230, IBM ServeRAID 7t, IBM ServeRAID 8i, IBM ServeRAID 8k/8k-l4, IBM ServeRAID 8k/8k-l8, IBM ServeRAID 8s, ICP ICP9024RO, ICP ICP9014RO, ICP ICP9047MA, ICP ICP9087MA, ICP ICP9085LI, ICP ICP5085BR, ICP ICP9067MA, ICP ICP5445SL, ICP ICP5085SL, ICP ICP5805SL, ICP ICP5045BL, ICP ICP5085BL, ICP ICP5805BL, ICP ICP5125BR, ICP ICP5165BR, ICP ICP5125SL, ICP ICP5165SL, SUN STK RAID REM, SUN STK RAID INT, SUN STK RAID EXT, SUN STK RAID EM, Adaptec RAID 6405, Adaptec RAID 6445, Adaptec RAID 6805 (external v1.2.1.56008)
aic94xx: Adaptec AIC94xx SAS/SATA support

AMD
[pata_amd: AMD 751, AMD 756, AMD 766, AMD 768, AMD 8111, AMD CS5536, nVidia nForce, nVidia nForce 2 and 3, nVidia CK804 and MCP04, nVidia MCP51, nVidia MCP55, nVidia MCP61, nVidia MCP65, nVidia MCP67, nVidia MCP73, nVidia MCP77] -> does not load: Unknown symbol syno_libata_index_get (err 0)

ARECA
arcmsr: ARECA (ARC11xx/12xx/13xx/16xx) SATA/SAS RAID Host Adapter

BusLogic
buslogic: BusLogic SCSI

HighPoint
hptiop: HighPoint RocketRAID 3xxx/4xxx Controller support

HP
hpsa: Smart Array P212 P410 P410i P411 P812 P712m P711m ; (Gen6/7 Controllers) Smart Array P222 P420 P420i P421 P822 P220i P721 ; (Gen8 Controllers) Smart Array P430 P430i P431 P830 P830i P831 P731m P230i P530 P531 ; (Gen8.5 Controllers) Smart Array P440 P441 P840 P440ar P244br H240 H241 H240ar H244br ; (Gen9 Controllers) HP StorageWorks 1210m P1224 P1228 P1228m P1224e P1228e P1228em
cciss: old Smart Array driver up to P420, Gen7

IBM
ips: IBM ServeRAID support

Intel
ata_piix: Intel IDE/PATA driver PIIX3/PIIX4/ICH0/ICH/ICH2/ICH3/C-ICH/ICH4/ICH5/6300ESB/ICH6/ICH7/ICH8M, SATA in IDE mode: ICH5/6300ESB/ICH6/CE3100/ICH7/NM10/631xESB/632xESB/ICH8/ICH9/ICH10/IIC
gdth: Intel/ICO RAID controller support
isci: Intel C600 Series Chipset SAS Controller
[pata_oldpiix: Intel PATA old PIIX] -> does not load: Unknown symbol syno_libata_index_get (err 0)
[pata_sch: Intel SCH PATA] -> does not load: Unknown symbol syno_libata_index_get (err 0)
[pata_mpiix: Intel PATA MPIIX] -> does not load: Unknown symbol syno_libata_index_get (err 0)

JMicron
[pata_jmicron: JMB361, JMB363, JMB365, JMB366, JMB368] -> does not load: Unknown symbol syno_libata_index_get (err 0)

LSI
megaraid: LSI MegaRAID legacy
megaraid_mbox: LSI MegaRAID Mailbox
megaraid_mm: LSI MegaRAID Management Module
megaraid_sas: LSI MegaRAID SAS 9361-8i/9361-4i9341-8i/9341-4i/9380-8e/9380-4i4e/9270-8i9271-4i/9271-8i/9271-8iCC/9286-8e/9286CV-8e/9286CV-8eCC/9265-8i/9285-8e/9240-4i/9240-8i/9260-4i/9260CV-4i/9260-8i/9260CV-8i/9260DE-8i/9261-8i/9280-4i4e/9280-8e/9280DE-8e/9280-24i4e/9280-16i4e/9260-16i/9266-4i/9266-8i/9285CV-8e
mptsas: LSI MPT SAS1064/SAS1068/SAS1064ET/SAS1068E/SAS8208ELP/8208ELP/SAS1078
mpt2sas: LSI MPT SAS 6Gb/s Host Adapters SAS2004/SAS2008/SAS2108/SAS2116/SAS2208/SAS2308/SSS6200
mpt3sas: LSI MPT SAS 12Gb/s Host Adapters SAS3004/SAS3008/SAS3108

Marvel
mvsas: Marvell PCIe 88SE64XX (3Gb/s) and 88SE94XX 6Gbs) SAS/SATA support, HighPoint RocketRAID 2710/2720/2721/2722/2740/2744/2760
mvumi: Marvell UMI driver
[pata_marevell: 88SE6101, 88SE6121, 88SE6123, 88SE6145] -> does not load: Unknown symbol syno_libata_index_get (err 0)

Nvidia
[sata_nv: nForce MCP51, MCP55, MCP61, nForce2, nForce3, nForce4 (CK804, MCP04)] -> does not load: Unknown symbol syno_libata_index_get (err 0)

Promise
[sata_promise: PDC20318 (SATA150 TX4), PDC20319 (FastTrak S150 TX4), PDC20371 (FastTrak S150 TX2plus), PDC20378 (FastTrak 378/SATA 378), PDC20375 (SATA150 TX2plus), PDC20376 (FastTrak 376), PDC40719 [FastTrak TX4300/TX4310], PDC40519 (FastTrak TX4200), PDC20771 [FastTrak TX2300], PDC20571 (FastTrak TX2200), PDC20579 SATAII 150 IDE Controller, PDC40718 (SATA 300 TX4), PDC20518/PDC40518 (SATAII 150 TX4), PDC40775 (SATA 300 TX2plus), PDC20575 (SATAII150 TX2plus), PDC20621 [SATA150 SX4] 4 Channel IDE RAID, PDC20619 (FastTrak TX4000)] -> does not load: Unknown symbol syno_libata_index_get (err 0)
[sata_sx4: PDC20621] -> does not load: Unknown symbol syno_libata_index_get (err 0)
sx8: Promise SATA SX8 support

Silicon Image
[pata_sil680: CMD/Silicon Image SiI680 PCI PATA controller] -> does not load: Unknown symbol syno_libata_index_get (err 0)
[sata_sil:SiI311x, SiI3512 / SB300, SB300C, SB4x0] -> does not load: Unknown symbol syno_libata_index_get (err 0)

Serverworks
pata_serverworks: OSB4/CSB5/CSB6/HT1000 PATA] -> does not load: Unknown symbol syno_libata_index_get (err 0)

VIA
pata_via: CX700, VT82c576, VT82c586, VT82c586A, VT82c586B, VT82c596A, VT82c596B, VT82c686, VT82c686A, VT82c686B, VT6330, VT6410, VT6415, VT6420, VT8231, VT8233, VT8233A, VT8233C, VT8235, VT8237, VT8237A, VT8237R, VT8237R Plus, VT8237S, VT8251, VT8261, VX700, VX855/875, SATA in IDE mode: CX700, VX700, VX800, VX900] -> does not load: Unknown symbol syno_libata_index_get (err 0
[sata_via: VX900, VT642x, VT8237 family, VT8251, VT8261] -> does not load: Unknown symbol syno_libata_index_get (err 0)

VMware
vmw_pvscsi: VMware Paravirtual SCSI Controller

CPU list for DS918+ Image - 4th gen Intel Core aka Haswell seems to be minimum requirement (Hide contents)

this list is not about stability, just does it boot/run and does it support hardware transcoding

DS918+ original Hardware
Celeron J3455, 4 cores, 1.5GHz base, 2.3 GHz burst, HD Graphics 500, Apollo Lake, Q3/2016
(USB 3.0, M.2 NVMe, 4GB RAM DDR3L 1866 CL13 1.35V, SATA Marvell 88SESE9215, Network Chip ???)

tested to boot, normal DSM usage without transcode:
Core i5-4570, 4 cores, 3.2 GHz base, 3.6 GHz burst, Intel HD Graphics 4600, Haswell, Q2/2013
Core i5-4670T, 4 cores, 2.3 GHz base, 3.3 GHz burst, Intel HD Graphics 4600, Haswell, Q2/2013
Xeon E3-1220v3, 4 cores, 3.1 GHz base, 3.5 GHz burst, no graphics, Haswell, Q2/2013
Xeon E3-1270v3, 4 cores, 3.5 GHz base, 3.9 GHz burst, no graphics, Haswell, Q2/2013
Atom C2550, 4 cores, 2.4 GHz base, 2.6 GHz burst, no graphics, Avoton, Q3/2013
Core i7-4790, 4 cores, 3.6 GHz base, 4.0 GHz burst, HD Graphics 4600, Haswell, Q2/2014
Celeron N3150, 4 cores, 1.6 GHz base, 2.1 GHz burst, HD Graphics Celeron N3000 Series, Braswell, Q1/2015
Core i3-6100, 2 cores, 3.7 GHz base, 3.70 GHz burst, HD Graphics 530, Skylake, Q3/2015
Core i5-6500, 4 cores, 3.2 GHz base, 3.60 GHz burst, HD Graphics 530, Skylake, Q3/2015
Xeon E3-1225v5, 4 cores, 3.7 GHz base, 3.70 GHz burst, HD Graphics P530, Skylake, Q4/2015
Celeron J3160, 4 cores, 1.6 GHz base, 2.2 GHz burst, HD Graphics 400, Braswell, Q1/2016
Celeron J3455, 4 cores, 1.5GHz base, 2.3 GHz burst, HD Graphics 500, Apollo Lake, Q3/2016
Pentium J4205, 4 cores, 1.5 GHz base, 2.6 GHz burst, HD Graphics 505, Apollo Lake, Q3/2016
Pentium G4560, 2 cores, 3.5 GHz base, 3.5 GHz burst, HD Graphics 610, Kaby Lake, Q1/2017
Pentium G4600, 2 cores, 3.6 GHz base, 3.6 GHz burst, HD Graphics 630, Kaby Lake, Q1/2017
Core i7-7700, 4 cores, 3.6 GHz base, 4.2 GHz burst, HD Graphics 630, Kaby Lake, Q1/2017
Core i7-7700T, 4 cores, 2.9 GHz base, 3.8 GHz burst, HD Graphics 630, Kaby Lake, Q1/2017
Xeon E3-1230v6, 4 cores, 3.5 GHz base, 3.9 GHz burst, no graphics, Kaby Lake, Q1/2017
Celeron J4105, 4 cores, 1.5 GHz base, 2.5 GHz burst, HD Graphics 600, Gemini Lake, Q4/2017
Pentium Silver J5005, 4 cores, 1.5 GHz base, 2.8 GHz burst, HD Graphics 605, Gemini Lake, Q4/2017
Core i3-8100, 4 cores, 3.6 GHz base, 3.6 GHz burst, HD Graphics 630, Coffee Lake, Q4/2017
Core i7-8700, 6 cores, 3.1 GHz base, 4.6 GHz burst, HD Graphics 630, Coffee Lake, Q4/2017
Core i7-8700K, 6 cores, 3.7 GHz base, 4.7 GHz burst, HD Graphics 630, Coffee Lake, Q4/2017
Pentium Gold G5500, 2 cores, 3.8 GHz base, 3.8 GHz burst, HD Graphics 630, Coffee Lake, Q2/2018
AMD Ryzen 7 2700X (only tested with Win10 and 918+ VM in VirtualBox)

tested to boot and video hardware transcode with DSM intergrated features:
section removed because of to many different views what it is and how to test it resulting in wrong or unsafe information, can be further discussed in the developer thread for dsm 6.2, if we find a easy test that works without a valid serial number that can be used be everyone it can be added again, i dont want people to make buying decisions based on unreliable information

not working:
(Core i3-4130, HD Graphics 4400, Haswell, Q3/2013 -> Haswell also as working (4th gen intel core))
AMD Phenom
Core i5-2500k
Core i7-2600, Sandy Bridge, Q1/2011
Xeon E3-1220L, Sandy Bridge, Q2/2011
Core i7-3770, Ivy Bridge, Q2/2012
Celeron G1610T (HP Microserver G8), Ivy Bridge, Q1/2013
Core i3-3220T, Ivy Bridge, Q3/2012
Core i3-3220, Ivy Bridge, Q3/2012
Pentium G2030, Ivy Bridge, Q3/2013

感谢提供的资源

能给1.04b集成吗？

如何集成驱动能出个教程吗？

这个是基于1.03a2扩展的吗？

canai1123 发表于 2018-8-3 13:18
什么意思？是系统已经迁移了 ？可以直接使用了吗？

试说明能识别引导，剩下的就不是问题了

124718842 发表于 2018-7-31 13:59
提示13错误说明已经成功了

什么意思？是系统已经迁移了 ？可以直接使用了吗？

楼主，扩展包驱动怎么添加到引导文件extra.lzma呢，可以分享一下方法，让我们这些小白也可以学习下！

0.5还是test版本。

canai1123 发表于 2018-7-31 13:14
试了试不行，安装的时候 提示文件损坏，不知道什么问题。有解决的 请 告诉我下0.0 ...

提示13错误说明已经成功了

试了试不行，安装的时候 提示文件损坏，不知道什么问题。有解决的 请 告诉我下0.0

能给搞个3617xs的吗？

看看跟原版的差别

是不是群晖里支持的路由器?感觉没用啊 我是手动映射

这么厉害。牛人不少啊

回头测试一下1U的Gen服务器能不能支持

新版本升级了

esxi试了一下，不行啊

注意~更新0.4后 LSI9211-8i HBA直通 无法加载,用0.2的就没有问题.
幸好我组了Raid 6 ,有2块盘刚好在HBA卡上,开机直接丢失了HBA上的所有硬盘.
现在用回0.2,正在恢复数据中TwT.

非常感谢