胡杨 发表于 2012-10-15 20:23 static/image/common/back.gif
{
"alt-speed-down": 50,
"alt-speed-enabled": false,
"incomplete-dir": "\/root\/Downloads",改成"incomplete-dir": "/mnt/disk1/share/Downloads/Temp"（下载临时文件保存路径（注意大小写））
看这个配置应该是改成了，配置自动启动的脚本了吗？配完了要重启一下，再不行的话把你改机执行命令的结果贴上来看看，
Wacker 发表于 2012-10-15 22:06 static/image/common/back.gif
"incomplete-dir": "\/root\/Downloads",改成"incomplete-dir": "/mnt/disk1/share/Downloads/Temp"（下 ...
要注意是否要改 disk1为array1
过着忙碌日子 发表于 2012-10-15 22:25 static/image/common/back.gif
要注意是否要改 disk1为array1
谢谢你的回复，我现在正在重新改机，为了把过程贴上来，另外我想问一下，我不想raid，但又是双盘的nas，那个disk1怎么改呢？
胡杨 发表于 2012-10-15 22:30 static/image/common/back.gif
谢谢你的回复，我现在正在重新改机，为了把过程贴上来，另外我想问一下，我不想raid，但又是双盘的nas， ...
disk1 or disk2
一般都放1位
楼主请帮忙看看，我刚设好了，但9091连不上，谢谢
{
"alt-speed-down": 50,
"alt-speed-enabled": false,
"alt-speed-time-begin": 540,
"alt-speed-time-day": 127,
"alt-speed-time-enabled": false,
"alt-speed-time-end": 1020,
"alt-speed-up": 20,
"bind-address-ipv4": "0.0.0.0",
"bind-address-ipv6": "::",
"blocklist-enabled": false,
"blocklist-url": "http://www.example.com/blocklist",
"cache-size-mb": 4,
"dht-enabled": true,
"download-dir": "/mnt/array1/share/Downloads",
"download-queue-enabled": true,
"download-queue-size": 5,
"encryption": 1,
"idle-seeding-limit": 30,
"idle-seeding-limit-enabled": false,
"incomplete-dir": "/mnt/array1/share/Downloads/Temp",
"incomplete-dir-enabled": false,
"lpd-enabled": false,
"message-level": 2,
"peer-congestion-algorithm": "",
"peer-limit-global": 240,
"peer-limit-per-torrent": 60,
"peer-port": 51413,
"peer-port-random-high": 65535,
"peer-port-random-low": 49152,
"peer-port-random-on-start": false,
"peer-socket-tos": "default",
"pex-enabled": false,
"port-forwarding-enabled": true,
"preallocation": 1,
"prefetch-enabled": 1,
"queue-stalled-enabled": true,
"queue-stalled-minutes": 30,
"ratio-limit": 2,
"ratio-limit-enabled": false,
"rename-partial-files": true,
"rpc-authentication-required": false,
"rpc-bind-address": "0.0.0.0",
"rpc-enabled": true,
"rpc-password": "{1a16f5f0fbd654513ea3465deb04d119f63da3daBk6MO2QG",
"rpc-port": 9091,
"rpc-url": "/transmission/",
"rpc-username": "",
"rpc-whitelist": "*.*.*.*",
"rpc-whitelist-enabled": true,
"scrape-paused-torrents-enabled": true,
"script-torrent-done-enabled": false,
"script-torrent-done-filename": "",
"seed-queue-enabled": false,
"seed-queue-size": 10,
"speed-limit-down": 100,
"speed-limit-down-enabled": false,
"speed-limit-up": 100,
"speed-limit-up-enabled": false,
"start-added-torrents": true,
"trash-original-torrent-files": false,
"umask": 18,
"upload-slots-per-torrent": 14,
"utp-enabled": true
}
请问我第一步改密码就报错
关防火墙再试
本帖最后由 Wacker 于 2012-10-16 09:09 编辑
过着忙碌日子 发表于 2012-10-15 22:46 static/image/common/back.gif
楼主请帮忙看看，我刚设好了，但9091连不上，谢谢
{
"alt-speed-down": 50,
这个配置应该没问题，你启动pt的进程了吗，用transmission-daemon -f看看，虽然我不知道-f参数干嘛用的，但确实能启动，呵呵
Wacker 发表于 2012-10-16 08:58 static/image/common/back.gif
这个配置应该没问题，你启动pt的进程了吗，用transmission-daemon -f看看，虽然我不知道-f参数干嘛用的， ...
已启动啊，但不行{:7_185:}
过着忙碌日子 发表于 2012-10-16 10:41 static/image/common/back.gif
已启动啊，但不行
这么说我也不知道原因啊，把你的执行结果贴上来吧
回复@njshuai:什么错误啊，贴上来看看
http://www.nas1.com.cn/xwb/images/bgimg/icon_logo.png 来自 与火共舞跳龙门 的新浪微博
run transmission-daemon -f後一直停在" DTH Attempting bootstrap from dht.transmissionbt.com (tr-dht.c:247)
不知道是不是这问题影响所有9091开不到?
过着忙碌日子 发表于 2012-10-16 19:50 static/image/common/back.gif
run transmission-daemon -f後一直停在" DTH Attempting bootstrap from dht.transmissionbt.com (tr-dht.c ...
为什么是run transmission-daemon -f应该是transmission-daemon -f
安装Optware。
请问怎么办？
-2012-10-16 20:15:13--http://ipkg.nslu2-linux.org/feeds/optware/cs05q3armel/cross/stable/lspro-bootstrap_1.2-7_arm.xsh
Resolving ipkg.nslu2-linux.org... failed: Name or service not known.
wget: unable to resolve host address `ipkg.nslu2-linux.org'
本帖最后由 过着忙碌日子 于 2012-10-16 20:37 编辑
pt880 发表于 2012-10-16 20:03 static/image/common/back.gif
为什么是run transmission-daemon -f应该是transmission-daemon -f
是transmission-daemon -f啊
root@LS-WVL298:~# transmission-daemon -f
Transmission 2.61 (13407) started (session.c:720)
RPC Server Adding address to whitelist: *.*.*.* (rpc-server.c:803 )
RPC Server Serving RPC and Web requests on port 127.0.0.1:9091/tr ansmission/ (rpc-server.c:997)
RPC Server Whitelist enabled (rpc-server.c:1001)
UDP Failed to set receive buffer: requested 4194304, got 327680 ( tr-udp.c:77)
UDP Please add the line "net.core.rmem_max = 4194304" to /etc/sys ctl.conf (tr-udp.c:82)
UDP Failed to set send buffer: requested 1048576, got 327680 (tr- udp.c:88)
UDP Please add the line "net.core.wmem_max = 1048576" to /etc/sys ctl.conf (tr-udp.c:93)
DHT Generating new id (tr-dht.c:309)
Using settings from "/root/.config/transmission-daemon" (daemon.c :517)
Saved "/root/.config/transmission-daemon/settings.json" (bencode. c:1731)
Port Forwarding (NAT-PMP) initnatpmp succeeded (0) (natpmp.c:72)
Port Forwarding (NAT-PMP) sendpublicaddressrequest succeeded (2) (natpmp.c:72)
Port Forwarding State changed from "Not forwarded" to "Starting" (port-forwarding.c:93)
Port Forwarding State changed from "Starting" to "???" (port-forwarding.c:93)
DHT Attempting bootstrap from dht.transmissionbt.com (tr-dht.c:247)
^C Saved "/root/.config/transmission-daemon/settings.json" (bencode.c:1731)
DHT Not saving nodes, DHT not ready (tr-dht.c:356)
Port Forwarding Stopped (port-forwarding.c:181)
Closing transmission session... done.
wget http://ipkg.nslu2-linux.org/feeds/optware/cs05q3armel/cross/stable/lspro-bootstrap_1.2-7_arm.xsh
这条命令报错
Resolving ipkg.nslu2-linux.org... failed: Name or service not known.
wget: unable to resolve host address `ipkg.nslu2-linux.org'
怎么办？
njshuai 发表于 2012-10-16 21:06 static/image/common/back.gif
wget http://ipkg.nslu2-linux.org/feeds/optware/cs05q3armel/cross/stable/lspro-bootstrap_1.2-7_arm.xs ...
没有给nas设置DNS服务器地址吧
本帖最后由 pt880 于 2012-10-16 22:04 编辑
过着忙碌日子 发表于 2012-10-16 20:35 static/image/common/back.gif
是transmission-daemon -f啊
root@LS-WVL298:~# transmission-daemon -f
把 下面一行
"port-forwarding-enabled": true,
改为
"port-forwarding-enabled": false,
把下面一行
"dht-enabled": true,
改为
"dht-enabled": false,
pt880 发表于 2012-10-16 22:03 static/image/common/back.gif
把 下面一行
"port-forwarding-enabled": true,
改为
改了都是一样啊
root@LS-WVL298:~# transmission-daemon -f
Transmission 2.61 (13407) started (session.c:720)
RPC Server Adding address to whitelist: *.*.*.* (rpc-server.c:803 )
RPC Server Serving RPC and Web requests on port 127.0.0.1:9091/tr ansmission/ (rpc-server.c:997)
RPC Server Whitelist enabled (rpc-server.c:1001)
Port Forwarding Stopped (port-forwarding.c:181)
UDP Failed to set receive buffer: requested 4194304, got 327680 ( tr-udp.c:77)
UDP Please add the line "net.core.rmem_max = 4194304" to /etc/sys ctl.conf (tr-udp.c:82)
UDP Failed to set send buffer: requested 1048576, got 327680 (tr- udp.c:88)
UDP Please add the line "net.core.wmem_max = 1048576" to /etc/sys ctl.conf (tr-udp.c:93)
Using settings from "/root/.config/transmission-daemon" (daemon.c :517)
Saved "/root/.config/transmission-daemon/settings.json" (bencode. c:1731)
^C Saved "/root/.config/transmission-daemon/settings.json" (bencode.c:1731)
Port Forwarding Stopped (port-forwarding.c:181)
Closing transmission session... done.
telnet登陆不上，
The remote system refused the connection.